Product features

● Advantages of titanium tube heater: titanium tube heat transfer is fast, corrosion-resistant, and not easy to break.

●The maximum water depth is 1 meter.

●This heating stick is built-in temperature switch and temperature fuse, when the heater leaves the water surface and is heated in the air, heater will cut off the power supply to stop heating. At this time, quickly put the heater back into the water, and the temperature switch can still be used. If heater is often heated in the air, the temperature fuse will burn out due to the high temperature. When temperature fuse is burned, heater cannot be used again.

● This heater must be used with a temperature controller, and direct plug-in is prohibited.

Installation instructions

1.Check whether the voltage of the power supply is consistent with the product label. 

2. Fix the heating stick with a suction cup in the position of strong water fluidity in the water tank. Then plug the power into the socket of the temperature controller.

3. Set the temperature of the controller before you plug it in.

Precautions

1. This heater must be used with the temperature controller, and it is forbidden to plug it in directly. When using, please do not touch the warming stick with your hands for safety.

2. The heater must be completely immersed in the water and fixed in a position where the water flow is smooth. Please do not bury the heater in the bottom sand, which will cause the heater to dissipate heat and shorten the life of the heater. 

3. Please use the temperature controller power supply alone, and you must pay attention to whether the power socket is good and not loose.

4. The plug part should not be soaked in water, and it should not be splashed, touched or placed in a humid environment such as above the sink.

5. This device is a heating equipment. Do not touch the heating surface of the heating rod with your body or flammable objects during heating. If you need the heater to leave the aquarium, before changing water or before going deep into the water, please be sure to unplug the power plug and wait 15 minutes. Take out the water after cooling time for more than a minute to ensure the safety of electricity and avoid danger.

 Warning: Before moving the electrical appliance out of the fish tank, the plug must be unplugged or turned off.

6. Only for indoor glass aquariums. This thermostat is for ornamental fish only. Please do not do other chemical liquid heating. And it is for indoor use only. Please do not use it outdoors. The heater itself should not be knocked or collided.

7. This appliance is not intended for users with physiological perception, mental intelligence, experience or lack of knowledge ( Including children ). Use, unless it is used safely under the supervision or guidance of the personnel responsible for their safety. Children should be supervised to ensure that children do not play with electrical appliances.

8. Before maintenance, be sure to unplug all electrical appliances in the aquarium or turn off the switch.

9. The power cord of the heater cannot be replaced by the user. When the power cord is damaged, the warming stick must be stopped and discarded immediately.

10. When choosing a compatible heater, it must be used with the appropriate amount of water in the aquarium. Especially aquariums with a water volume of less than 5 liters, never use a heater with too high wattage (power). The excessive temperature heater is easy to cause the phenomenon of over-temperature in the aquarium.